Peer-reviewed publications
Showing entries 401 - 450 out of 569
2012
Revesz, A, Kis-Tóth, A, Varga, LK, Schafler, E, Bakonyi, I & Spassov, T 2012, 'Hydrogen storage of melt-spun amorphous Mg65Ni20Cu5Y10 alloy deformed by high-pressure torsion', International Journal of Hydrogen Energy, vol. 37, no. 7, pp. 5769-5776. https://doi.org/10.1016/j.ijhydene.2011.12.160
Ahlgren, EH, Kotakoski, J, Lehtinen, O & Krasheninnikov, A 2012, 'Ion irradiation tolerance of graphene as studied by atomistic simulations', Applied Physics Letters, vol. 100, no. 23, 233108. https://doi.org/10.1063/1.4726053
Kotakoski, J & Meyer, JC 2012, 'Mechanical properties of polycrystalline graphene based on a realistic atomistic model', Physical Review B, vol. 85, no. 19, 195447. https://doi.org/10.1103/PhysRevB.85.195447
Khatibi, G, Weiss, B, Bernardi, J & Schwarz, SW 2012, 'Microstructural Investigation of Interfacial Features in Al Wire Bonds', Journal of Electronic Materials, vol. 41, no. 12, pp. 3436-3446. https://doi.org/10.1007/s11664-012-2215-2
Lee, Z, Meyer, JC, Rose, H & Kaiser, U 2012, 'Optimum HRTEM image contrast at 20 kV and 80 kV-Exemplified by graphene', Ultramicroscopy, vol. 112, no. 1, pp. 39-46. https://doi.org/10.1016/j.ultramic.2011.10.009
Rafailovic, L, Gammer, C, Rentenberger, C, Kleber, C, Whitehead, AH, Gollas, B & Karnthaler, H-P 2012, 'Preparation of CoNi high surface area porous foams by substrate controlled electrodeposition', Physical Chemistry Chemical Physics, vol. 14, no. 2, pp. 972-980. https://doi.org/10.1039/c1cp22503k
Kilmametov, A, Balogh, AG, Ghafari, M, Gammer, C, Mangler, C, Rentenberger, C, Valiev, RZ & Hahn, H 2012, 'Radiation effects in bulk nanocrystalline FeAl alloy', Radiation Effects and Defects in Solids, vol. 167, no. 8/SI, pp. 631-639. https://doi.org/10.1080/10420150.2012.666241
Rogl, G, Grytsiv, A, Falmbigl, M, Bauer, E, Mangler, C, Rentenberger, C, Zehetbauer, M & Rogl, PF 2012, 'Spinodal decomposition in (CaxBa1-x)(y)Fe4Sb12', Acta Materialia, vol. 60, no. 11, pp. 4487-4495. https://doi.org/10.1016/j.actamat.2012.04.038
Kotakoski, J, Santos-Cottin, D & Krasheninnikov, A 2012, 'Stability of Graphene Edges under Electron Beam: Equilibrium Energetics versus Dynamic Effects', ACS Nano, vol. 6, no. 1, pp. 671-676. https://doi.org/10.1021/nn204148h
Rafailovic, L, Gammer, C, Kleber, C, Rentenberger, C, Angerer, P & Karnthaler, H-P 2012, 'Synthesis and characterization of electrodeposited hierarchical nanodendritic NiCoFe alloy powders', Journal of Alloys and Compounds, vol. 543, pp. 167-171. https://doi.org/10.1016/j.jallcom.2012.07.081
Pantelic, RS, Meyer, JC, Kaiser, U & Stahlberg, H 2012, 'The application of graphene as a sample support in transmission electron microscopy', Solid State Communications, vol. 152, no. 15/SI, pp. 1375-1382. https://doi.org/10.1016/j.ssc.2012.04.038
Schöck, G 2012, 'The core structure and Peierls potential of dislocations in Al', Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, vol. 558, pp. 162-169. https://doi.org/10.1016/j.msea.2012.07.106
Bachmaier, A, Kerber, M, Setman, D & Pippan, R 2012, 'The formation of supersaturated solid solutions in Fe-Cu alloys deformed by high-pressure torsion', Acta Materialia, vol. 60, no. 3, pp. 860-871. https://doi.org/10.1016/j.actamat.2011.10.044
Spieckermann, F, Polt, G, Wilhelm, H, Kerber, M, Schafler, E & Zehetbauer, M 2012, 'The role of dislocations for the plastic deformation of semicrystalline polymers as investigated by multireflection X-ray line profile analysis', Journal of Applied Polymer Science, vol. 125, no. 6, pp. 4150-4154. https://doi.org/10.1002/app.36570
Rogl, G, Grytsiv, A, Falmbigl, M, Bauer, E, Rogl, PF, Zehetbauer, M & Gelbstein, Y 2012, 'Thermoelectric properties of p-type didymium (DD) based skutterudites DDy(Fe1-xNix)(4)Sb-12 (0.13', Journal of Alloys and Compounds, vol. 537, pp. 242-249. https://doi.org/10.1016/j.jallcom.2012.04.121
Komsa, H-P, Kotakoski, J, Kurasch, S, Lehtinen, O, Kaiser, U & Krasheninnikov, A 2012, 'Two-Dimensional Transition Metal Dichalcogenides under Electron Irradiation: Defect Production and Doping', Physical Review Letters, vol. 109, no. 3, 035503. https://doi.org/10.1103/PhysRevLett.109.035503
Cagiao, ME, Baltá-Calleja, FJ, Spieckermann, F, Scholtyssek, S, Mina, MF & Bhuiyan, MAH 2012, 'X-ray diffraction study of iPP/cand iPP/TiO2 composites relating to micromechanical properties', Journal of Applied Polymer Science, vol. 124, no. 4, pp. 3147-3153. https://doi.org/10.1002/app.34716
2011
Rogl, G, Grytsiv, A, Rogl, PF, Bauer, E & Zehetbauer, M 2011, 'A new generation of p-type didymium skutterudites with high ZT', Intermetallics, vol. 19, no. 4, pp. 546-555. https://doi.org/10.1016/j.intermet.2010.12.001
Oh, SH, Rentenberger, C, Im, J, Motz, C, Kiener, D, Karnthaler, H-P & Dehm, G 2011, 'Dislocation plasticity of Al film on polyimide investigated by cross-sectional in situ transmission electron microscopy straining', Scripta Materialia, vol. 65, no. 5, pp. 456-459. https://doi.org/10.1016/j.scriptamat.2011.06.001
Schafler, E 2011, 'Effect of Hydrostatic Pressure on the Microstructure and Mechanical Properties during and after High Pressure Torsion', Materials Science Forum, vol. 667-669, pp. 657-664. https://doi.org/10.4028/www.scientific.net/MSF.667-669.657
Geist, D, Rentenberger, C & Karnthaler, H-P 2011, 'Extreme structural inhomogeneities in high-pressure torsion samples along the axial direction', Acta Materialia, vol. 59, no. 11, pp. 4578-4586. https://doi.org/10.1016/j.actamat.2011.04.003
Danninger, H, Sohar, C, Gierl, C, Betzwar-Kotas, A & Weiss, B 2011, 'Gigacycle Fatigue Response of PM versus Ingot Metallurgy Tool Steels', Materials Science Forum, vol. 672, pp. 23-30. https://doi.org/10.4028/www.scientific.net/MSF.672.23
Gammer, C, Mangler, C, Karnthaler, H-P & Rentenberger, C 2011, 'Growth of nanosized chemically ordered domains in intermetallic FeAl made nanocrystalline by severe plastic deformation', Scripta Materialia, vol. 65, no. 1, pp. 57-60. https://doi.org/10.1016/j.scriptamat.2011.03.002
Peterlechner, M, Waitz, T, Gammer, C & Antretter, T 2011, 'Martensitic phase transformations of nanocrystalline NiTi shape memory alloys processed by repeated cold rolling', International Journal of Materials Research, vol. 102, no. 6/SI, pp. 634-642. https://doi.org/10.3139/146.110525
Podolskiy, AV, Bonarski, B, Setman, D, Mangler, C, Schafler, E, Tabachnikova, ED & Zehetbauer, M 2011, 'Microstructure and Properties of Nanostructured Zirconium Processed by High Pressure Torsion', Materials Science Forum, vol. 667-669, pp. 433-438. https://doi.org/10.4028/www.scientific.net/MSF.667-669.433
Iqbal, MJ, Ismail, B, Rentenberger, C & Ipser, H 2011, 'Modification of the physical properties of semiconducting MgAl(2)O(4) by doping with a binary mixture of Co and Zn ions', Materials Research Bulletin, vol. 46, no. 12, pp. 2271-2277. https://doi.org/10.1016/j.materresbull.2011.08.061
Geist, D, Ii, S, Tsuchiya, K, Karnthaler, H-P, Stefanov, G & Rentenberger, C 2011, 'Nanocrystalline Zr(3)Al made through amorphization by repeated cold rolling and followed by crystallization', Journal of Alloys and Compounds, vol. 509, no. 5, pp. 1815-1818. https://doi.org/10.1016/j.jallcom.2010.10.050
Kozina, V, Banek, L, Knezevic, N, Geist, D, Kubinová, L, Kosovic, M, Rentenberger, C, Vukasovic, A & Jezek, D 2011, 'Reinke's crystals in perivascular and peritubular Leydig cells', Croatica Chemica Acta, vol. 84, no. 2, pp. 159-167. https://doi.org/10.5562/cca1814
Lederer, M, Khatibi, G, Weiss, B & Ipser, H 2011, 'Reliability and vibrational fatigue response of ball grid array packages', Micromaterials and Nanomaterials: a publication series of the Micro Materials Center Berlin at the Fraunhofer Institute IZM, vol. 13, pp. 82-85.
Podolskiy, AV, Smirnov, NS, Tabachnikova, ED, Bengus, VZ, Velikodny, AN, Tikhonovsky, MA, Bonarski, B, Mangler, C & Zehetbauer, M 2011, 'Strain hardening and microstructure evolution during uniaxial compression of ultrafine grained zirconium at temperatures of 4.2-300 K', Low Temperature Physics, vol. 37, no. 7, pp. 609-617. https://doi.org/10.1063/1.3645014
Schafler, E 2011, 'Strength response upon pressure release after high pressure torsion deformation', Scripta Materialia, vol. 64, no. 2, pp. 130-132. https://doi.org/10.1016/j.scriptamat.2010.09.026
Schöck, G 2011, 'The Peierls stress in a simple cubic lattice', Physica Status Solidi. B: Basic Research, vol. 248, no. 10, pp. 2284-2289. https://doi.org/10.1002/pssb.201147081
Gammer, C, Mangler, C, Karnthaler, H-P & Rentenberger, C 2011, 'Three-Dimensional Analysis by Electron Diffraction Methods of Nanocrystalline Materials', Microscopy and Microanalysis, vol. 17, no. 6, pp. 866-871. https://doi.org/10.1017/S1431927611011962
Kozina, V, Geist, D, Kubínová, L, Bilic, E, Karnthaler, H-P, Waitz, T, Janacek, J, Chernyavskiy, O, Krhen, I & Jezek, D 2011, 'Visualization of Reinke's crystals in normal and cryptorchid testis', Histochemistry and Cell Biology, vol. 135, no. 2, pp. 215-228. https://doi.org/10.1007/s00418-011-0782-6
Kerber, M, Zehetbauer, M, Schafler, E, Spieckermann, F, Bernstorff, S & Ungar, T 2011, 'X-ray line profile analysis-An ideal tool to quantify structural parameters of nanomaterials', J O M, vol. 63, no. 7, pp. 61-69. https://doi.org/10.1007/s11837-011-0115-1
2010
Zhang, L, Melnychenko-Koblyuk, N, Royanian, E, Grytsiv, A, Rogl, P & Bauer, E 2010, 'Influence of filler element and Ni-substitution on thermoelectric properties of multi-filled skutterudites', Journal of Alloys and Compounds, vol. 504, no. 1, pp. 53-59. https://doi.org/10.1016/j.jallcom.2010.05.083
Oberdorfer, B, Lorenzoni, B, Unger, K, Sprengel, W, Zehetbauer, M, Pippan, R & Würschum, R 2010, 'Absolute concentration of free volume-type defects in ultrafine-grained Fe prepared by high-pressure torsion', Scripta Materialia, vol. 63, no. 4, pp. 452-455. https://doi.org/10.1016/j.scriptamat.2010.05.007
Setman, D, Kerber, MB, Schafler, E & Zehetbauer, M 2010, 'Activation Enthalpies of Deformation-Induced Lattice Defects in Severe Plastic Deformation Nanometals Measured by Differential Scannning Calorimetry', Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, vol. 41, no. 4, pp. 810-815. https://doi.org/10.1007/s11661-009-0058-0
Schöck, G 2010, 'Atomic dislocation core parameters', Physica Status Solidi. B: Basic Research, vol. 247, no. 2, pp. 265-268. https://doi.org/10.1002/pssb.200945379
Schöck, G 2010, 'Bordoni relaxation in kink-chains', Acta Materialia, vol. 58, no. 8, pp. 2898-2904. https://doi.org/10.1016/j.actamat.2010.01.018
Zehetbauer, M, Grössinger, R, Krenn, H, Krystian, M, Pippan, R, Rogl, PF, Waitz, T & Würschum, R 2010, 'Bulk nanostructured functional materials by severe plastic deformation', Advanced Engineering Materials, vol. 12, no. 8, pp. 692-700. https://doi.org/10.1002/adem.201000119
Henits, P, Revesz, A, Schafler, E, Szabó, PJ, Labar, JL, Varga, LK & Kovacs, Z 2010, 'Correlation between microstructural evolution during high-pressure torsion and isothermal heat treatment of amorphous Al85Gd8Ni5Co2 alloy', Journal of Materials Research, vol. 25, no. 7, pp. 1388-1397. https://doi.org/10.1557/JMR.2010.0164
Spieckermann, F, Wilhelm, H, Kerber, M, Schafler, E, Polt, G, Bernstorff, S, Addiego, F & Zehetbauer, M 2010, 'Determination of Lamella Thickness Distributions in Isotactic Polypropylene by X-ray Line Profile Analysis', Polymer, vol. 51, no. 18, pp. 4195-4199. https://doi.org/10.1016/j.polymer.2010.07.009
Schöck, G & Romaner, L 2010, 'Deviations and polarity of [100] dislocations in bcc metals', Philosophical Magazine Letters, vol. 90, no. 6, pp. 385-391. https://doi.org/10.1080/09500831003680760
Schafler, E 2010, 'Effects of releasing the hydrostatic pressure on the nanostructure after severe plastic deformation of Cu', Scripta Materialia, vol. 62, no. 6, pp. 423-426. https://doi.org/10.1016/j.scriptamat.2009.12.004
Geist, D, Gammer, C, Mangler, C, Rentenberger, C & Karnthaler, H-P 2010, 'Electron microscopy of severely deformed L12 intermetallics', Philosophical Magazine, vol. 90, no. 35-36, pp. 4635-4645. https://doi.org/10.1080/14786435.2010.482178
Krystian, M, Setman, D, Mingler, B, Krexner, G & Zehetbauer, M 2010, 'Formation of superabundant vacancies in nano-Pd-H generated by high-pressure torsion', Scripta Materialia, vol. 62, no. 1, pp. 49-52. https://doi.org/10.1016/j.scriptamat.2009.09.025
Sohar, C, Betzwar-Kotas, A, Gierl, C, Danninger, H & Weiss, B 2010, 'Gigacycle fatigue response of tool steels produced by powder metallurgy compared to ingot metallurgy tool steels', International Journal of Materials Research, vol. 101, no. 9, pp. 1140-1150. https://doi.org/10.3139/146.110395
Khatibi, G, Horky, J, Weiss, B & Zehetbauer, M 2010, 'High cycle fatigue behaviour of copper deformed by high pressure torsion', International Journal of Fatigue, vol. 32, no. 2, pp. 269-278. https://doi.org/10.1016/j.ijfatigue.2009.06.017
Revesz, A, Kovacs, Z, Szabó, PJ, Schafler, E, Varga, LK & Hóbor, S 2010, 'High pressure torsion of binary Cu64.5Zr35.5 alloy', Physica Status Solidi. A: Applications and Materials Science, vol. 207, no. 5, pp. 1185-1189. https://doi.org/10.1002/pssa.200925457
Showing entries 401 - 450 out of 569