Press releases
15.04.2019
Peer-reviewed publications
Showing entries 501 - 550 out of 582
2009
Salje, EKH, Koppensteiner, J, Reinecker, M, Schranz, W & Planes, A 2009, 'Jerky elasticity: Avalanches and the martensitic transition in Cu74.08Al23.13Be2.79 shape-memory alloy', Applied Physics Letters, vol. 95, 231908. https://doi.org/10.1063/1.3269578
Kulyasova, OB, Islamgaliev, RK, Mingler, B & Zehetbauer, M 2009, 'Microstructure and fatigue properties of the ultrafine-grained AM60 magnesium alloy processed by Equal Channel Angular Pressing', Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, vol. 503, no. 1-2, pp. 176-180. https://doi.org/10.1016/j.msea.2008.03.057
Lechner, W, Puff, W, Mingler, B, Zehetbauer, M & Würschum, R 2009, 'Microstructure and vacancy-type defects in high-pressure torsion deformed Al-Cu-Mg-Mn alloy', Scripta Materialia, vol. 61, no. 4, pp. 383-386. https://doi.org/10.1016/j.scriptamat.2009.04.027
Zhang, L, Grytsiv, A, Kerber, M, Rogl, PF, Bauer, E, Zehetbauer, M, Wosik, J & Nauer, G 2009, 'MmFe4Sb12- and CoSb3-based nano-skutterudites prepared by ball milling: Kinetics of formation and transport properties', Journal of Alloys and Compounds, vol. 481, no. 1-2, pp. 106-115. https://doi.org/10.1016/j.jallcom.2009.03.109
Rafailovic, L, Maricic, AM, Artner, W, Nauer, GE & Minic, DM 2009, 'Morphology and Microstructure of Annealed Ni-Co Alloy Powders Electrodeposited on Copper Substrates', SCIENCE OF SINTERING, vol. 41, no. 2, pp. 135-142. https://doi.org/10.2298/SOS0902135R
Peterlechner, M, Waitz, T & Karnthaler, H-P 2009, 'Nanoscale amorphization of severely deformed NiTi shape memory alloys', Scripta Materialia, vol. 60, no. 12, pp. 1137-1140. https://doi.org/10.1016/j.scriptamat.2009.02.055
Waitz, T, Tsuchiya, K, Antretter, T & Fischer, FD 2009, 'Phase transformations of nanocrystalline martensitic materials', MRS Bulletin, vol. 34, no. 11, pp. 814-821. https://doi.org/10.1557/mrs2009.231
Sohar, CR, Betzwar-Kotas, A, Gierl, C, Weiss, B & Danninger, H 2009, 'PM tool steels push the edge in fatigue tests', Metal Powder Report, vol. 64, no. 2, pp. 12-17. https://doi.org/10.1016/S0026-0657(09)70013-X
Lechner, W, Puff, W, Würschum, R, Wilde, G, Zehetbauer, M & Pippan, R 2009, 'Positron annihilation studies of HPT deformed Aluminium alloys', Physica Status Solidi C-Current Topics in Solid State Physics, vol. 6, no. 11, pp. 2313-2315. https://doi.org/10.1002/pssc.200982088
Yagotintsev, K, Stetsenko, YE, Legchenkova, IV, Prokhvatilov, AI, Strzhemechny, M, Schafler, E & Zehetbauer, M 2009, 'Process of intercalation of C60 with molecular hydrogen according to X-ray diffraction data', Low Temperature Physics, vol. 35, pp. 238-242. https://doi.org/10.1063/1.3081158
Biedermann, A 2009, 'Stability of the nanomartensitic phase in ultrathin Fe films on Cu(100)', Physical Review B, vol. 80, 235403. https://doi.org/10.1103/PhysRevB.80.235403
Angerer, P, Simunkova, H, Schafler, E, Kerber, MB, Wosik, J & Nauer, GE 2009, 'Structure and texture of electrochemically prepared nickel layers with co-deposited zirconia nanoparticles', Surface and Coatings Technology, vol. 203, no. 10-11, pp. 1438-1443. https://doi.org/10.1016/j.surfcoat.2008.11.011
Rafailovic, L, Artner, W, Nauer, G & Minic, DM 2009, 'Structure, morphology and thermal stability of electrochemically obtained Ni-Co deposits', Thermochimica Acta, vol. 496, no. 1-2, pp. 110-116. https://doi.org/10.1016/j.tca.2009.07.007
Kerber, MB, Schafler, E, Wieczorek, AK, Ribarik, G, Bernstorff, S, Ungar, T & Zehetbauer, M 2009, 'Synchrotron X-ray line profile analysis experiments for the in-situ microstructural characterisation of SPD nanometals during tensile deformation', International Journal of Materials Research, vol. 100, pp. 770-774. https://doi.org/10.3139/146.110097
Schöck, G 2009, 'The Bordoni relaxation revisited', Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, vol. 521-522, pp. 24-29. https://doi.org/10.1016/j.msea.2008.09.117
Schöck, G 2009, 'The cross-slip energy unresolved', Philosophical Magazine Letters, vol. 89, no. 8, pp. 505-515. https://doi.org/10.1080/09500830903092399
2008
Khatibi, G, Wroczewski, W, Weiss, B & Licht, T 2008, 'A Fast Mechanical Test Technique for Lifetime Estimation of Microjoints', Microelectronics Reliability, vol. 48, no. 11-12, pp. 1822-1830. https://doi.org/10.1016/j.microrel.2008.09.003
Sohar, C, Betzwar-Kotas, A, Gierl, C, Weiss, B & Danninger, H 2008, 'Anisotropy effects on gigacycle fatigue behaviour of high Cr alloyed cold work tool steel', Kovove Materialy - Metallic Materials, vol. 46, no. 4, pp. 197-207. <http://www.kovmat.sav.sk/abstract.php?rr=46&cc=4&ss=197>
Spieckermann, F, Wilhelm, H, Schafler, E, Ahzi, S & Zehetbauer, M 2008, 'Application of composite models to isotactic polypropylene for the determination of phase specific stress-strain curves', Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, vol. 483-484, no. SI, pp. 76-78. https://doi.org/10.1016/j.msea.2006.10.180
Waitz, T 2008, 'Bulk nanostructured shape memory alloys', Ciencia & Tecnologia dos Materiais, vol. 20, no. 1-2, pp. 25-29.
Waitz, T, Pranger, W, Antretter, T, Fischer, FD & Karnthaler, H-P 2008, 'Competing accommodation mechanisms of the martensite in nanocrystalline NiTi shape memory alloys', Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, vol. 481-482, no. SI, pp. 479-483. https://doi.org/10.1016/j.msea.2007.03.122
Koppensteiner, J, Schranz, W & Puica, M-R 2008, 'Confinement effects on glass forming liquids probed by dynamic mechanical analysis', Physical Review B, vol. 78, no. 5, 054203. https://doi.org/10.1103/PhysRevB.78.054203
Bonarski, B, Mikulowski, B, Schafler, E, Holzleithner, C & Zehetbauer, M 2008, 'Crystallographic textures of single and polycrystalline pure Mg and Cu subjected to HPT deformation', Archives of Metallurgy and Materials, vol. 53, no. 1, pp. 117-123. <http://www.imim.pl/files/archiwum/Vol1_2008/artykuly/19_.pdf>
Sergeeva, A, Setman, D, Zehetbauer, M, Prokoshkin, S & Stolyarov, VV 2008, 'Effect of Electroplastic Deformation on Martensitic Transformation in Coarse Grained and Ultrafine Grained Ni-Ti Shape Memory Alloy', Materials Science Forum, vol. 584-586, pp. 127-132. https://doi.org/10.4028/www.scientific.net/MSF.584-586.127
Rentenberger, C & Karnthaler, H-P 2008, 'Extensive disordering in long-range-ordered Cu3Au induced by severe plastic deformation studied by transmission electron microscopy', Acta Materialia, vol. 56, no. 11, pp. 2526-2530. https://doi.org/10.1016/j.actamat.2008.01.035
Sohar, C, Betzwar-Kotas, A, Gierl, C, Weiss, B & Danninger, H 2008, 'Fractographic evaluation of gigacycle fatigue crack nucleation and propagation of a high Cr alloyed cold work tool steel', International Journal of Fatigue, vol. 30, no. 12, pp. 2191-2199. https://doi.org/10.1016/j.ijfatigue.2008.05.013
Sohar, C, Betzwar-Kotas, A, Gierl, C, Weiss, B & Danninger, H 2008, 'Gigacycle fatigue behavior of a high chromium alloyed cold work tool steel', International Journal of Fatigue, vol. 30, pp. 1137-1149. https://doi.org/10.1016/j.ijfatigue.2007.09.012
Geist, D, Rentenberger, C & Karnthaler, H-P 2008, 'High pressure torsion of intermetallic Zr3Al', Materials Science Forum, vol. 584-586, pp. 553-558. https://doi.org/10.4028/www.scientific.net/MSF.584-586.553
Stolyarov, VV, Zeipper, L, Mingler, B & Zehetbauer, M 2008, 'Influence of post-deformation on CP-Ti processed by equal channel angular pressing', Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, vol. 476, no. 1-2, pp. 98-105. https://doi.org/10.1016/j.msea.2007.04.069
Sohar, C, Betzwar-Kotas, A, Gierl, C, Weiss, B & Danninger, H 2008, 'Influence of surface residual stresses on gigacycle fatigue response of high chromium cold work tool steel', Materialwissenschaft und Werkstofftechnik, vol. 39, no. 3, pp. 248-257. https://doi.org/10.1002/mawe.200700216
Rupp, W, Biedermann, A, Kamenik, B, Ritter, R, Klein, C, Platzgummer, E, Schmid, MA & Varga, P 2008, 'Ion-beam induced fcc-bcc transition in ultrathin Fe films for ferromagnetic patterning', Applied Physics Letters, vol. 93, no. 6, 063102. https://doi.org/10.1063/1.2969795
Setman, D, Krystian, M & Zehetbauer, M 2008, 'Lattice Defects in Hydrogenated and HPT Processed Pd', Materials Science Forum, vol. 584-586, pp. 355-360. https://doi.org/10.4028/www.scientific.net/MSF.584-586.355
Zimprich, P, Saeed, U, Betzwar-Kotas, A, Weiss, B & Ipser, H 2008, 'Mechanical size effects in miniaturized-lead free solder joints', Journal of Electronic Materials, vol. 37, no. 1, pp. 102-109. https://doi.org/10.1007/s11664-007-0278-2
Weinberger, M, Puchegger, S, Rentenberger, C, Hüsing, N, Peterlik, H & Puchberger, M 2008, 'Mesoporous dendrimer silica monoliths studied by small-angle X-ray scattering', Journal of Materials Chemistry, vol. 18, no. 40, pp. 4783-4789. https://doi.org/10.1039/B806931J
Peterlechner, M, Waitz, T & Karnthaler, H-P 2008, 'Nanocrystallization of NiTi shape memory alloys made amorphous by high-pressure torsion', Scripta Materialia, vol. 59, no. 5, pp. 566-569. https://doi.org/10.1016/j.scriptamat.2008.05.004
Enikeev, N, Schafler, E, Zehetbauer, M, Alexandrov, IV & Valiev, RZ 2008, 'Observations of Texture in Large Scale HPT-Processed Cu', Materials Science Forum, vol. 584-586, no. 1, pp. 367-374. https://doi.org/10.4028/www.scientific.net/MSF.584-586.367
Fischer, FD, Waitz, T, Vollath, D & Simha, NK 2008, 'On the role of surface energy and surface stress in phase transforming nanoparticles', Progress in Materials Science, vol. 53, no. 3, pp. 481-527. https://doi.org/10.1016/j.pmatsci.2007.09.001
Lasagni, F, Mingler, B, Dumont, M & Degischer, HP 2008, 'Precipitation kinetics of Si in aluminium alloys', Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, no. 480, pp. 383–391. https://doi.org/10.1016/j.msea.2007.07.008
Zimprich, P, Betzwar-Kotas, A, Khatibi, G, Weiss, B & Ipser, H 2008, 'Size effects in small scaled lead-free solder joints', Journal of Materials Science: Materials in Electronics, vol. 19, no. 4, pp. 383-388. https://doi.org/10.1007/s10854-007-9349-7
Waitz, T, Antretter, T, Fischer, FD & Karnthaler, H-P 2008, 'Size effects on martensitic phase transformations in nanocrystalline NiTi shape memory alloys', Materials Science and Technology: an international journal of technological advances in the production and use of steel, vol. 24, no. 8, pp. 934-940. https://doi.org/10.1179/174328408X302620
Zhang, HW, Huang, X, Hansen, N, Pippan, R & Zehetbauer, M 2008, 'Strenghening of Nickel deformed by high Pressure Torsion', Materials Science Forum, vol. 584-586, pp. 417-421. https://doi.org/10.4028/www.scientific.net/MSF.584-586.417
Revesz, A, Schafler, E & Kovacs, Z 2008, 'Structural anisotropy in a Zr57Ti5Cu20Al10Ni8 bulk metallic glass deformed by high pressure torsion at room temperature', Applied Physics Letters, vol. 92, no. 1, 011910. https://doi.org/10.1063/1.2830992
Islamgaliev, RK, Kulyasova, OB, Mingler, B, Zehetbauer, M & Minkow, A 2008, 'Structure and Fatigue Properties of the Mg Alloy AM60 Processed by ECAP', Materials Science Forum, vol. 584-586, pp. 803-808. https://doi.org/10.4028/www.scientific.net/MSF.584-586.803
Rentenberger, C, Mangler, C, Scheriau, S, Pippan, R & Karnthaler, H-P 2008, 'TEM study of local disordering: a structural phase change induced by high-pressure torsion', Materials Science Forum, vol. 584-586, pp. 422-427. https://doi.org/10.4028/www.scientific.net/MSF.584-586.422
Bonarski, B, Schafler, E, Mikulowski, B & Zehetbauer, M 2008, 'Texture Evolution of Magnesium Single Crystals Deformed by High-Pressure Torsion', Materials Science Forum, vol. 584-586, pp. 263-268. https://doi.org/10.4028/www.scientific.net/MSF.584-586.263
Bonarski, B, Schafler, E, Mingler, B, Skrotzki, W, Mikulowski, B & Zehetbauer, M 2008, 'Texture Evolution of Mg during High-Pressure Torsion', Journal of Materials Science, vol. 43, no. 23-24, pp. 7513-7518. https://doi.org/10.1007/s10853-008-2794-8
Lederer, M, Gröger, V & Schafler, E 2008, 'The influence of the texture on yield strength and strain hardening of high purity aluminium foils', Archives of Metallurgy and Materials, vol. 53, no. 1, pp. 69-73. <http://www.imim.pl/files/archiwum/Vol1_2008/artykuly/11_.pdf>
Setman, D, Schafler, E, Korznikova, E & Zehetbauer, M 2008, 'The presence and nature of vacancy type defects in nanometals detained by severe plastic deformation', Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, vol. 493, no. 1-2, pp. 116-122. https://doi.org/10.1016/j.msea.2007.06.093
Rentenberger, C & Karnthaler, H-P 2008, 'The stability of screw dipoles in Ni3Al studied by TEM', Intermetallics, vol. 16, no. 4, pp. 571-579. https://doi.org/10.1016/j.intermet.2008.01.009
Rauchbauer, G, Buchsbaum, A, Schiechl, H, Varga, P, Schmid, MA & Biedermann, A 2008, 'Ultra-thin Fe films grown on Cu by pulsed laser deposition: Intermixing and bcc-like structures', Surface Science, no. 602, pp. 1589–1598. https://doi.org/10.1016/j.susc.2008.02.024
Showing entries 501 - 550 out of 582